-
Alternative name
Acyl carrier protein 3, chloroplastic ELISA KIT; ACP3 ELISA KIT; A2 ELISA KIT; ACL1.3 ELISA KIT; At1g54630 ELISA KIT; T22H22.7 ELISA KIT; ACP-3 ELISA KIT
-
Catalog
E000295
-
species
Human
-
GeneACP3
-
Standard Curve
-
Other Species
Human ACP3/PAP ELISA KitMouse ACP3 ELISA Kit
-
SamplesSerum, Plasma , tissue homogenates,Cell culture supernates,Other biological fluids.
-
Intended UseHuman ACP3 ELISA Kit allows for the in vitro quantitative determination of ACP3 , concentrations in serum, Plasma , tissue homogenates and Cell culture supernates and Other biological fluids.
-
StorageFor 5-7days:Store the whole kit at 4℃
For a Long time :Store the Substrate at 4℃, other reagent should store at -20℃.
-
Product Categories/FamilySignal Transduction
-
Product Description
specificalIntended Uses: This ACP3 ELISA kit is intended Laboratory for research use only and is not for use in diagnostic or therapeutic procedures.The Stop Solution changes the color from blue to yellow and the intensity of the color is measured at 450 nm using a spectrophotometer. In order to measure the concentration of ACP3 in the sample, this ACP3 ELISA Kit includes a set of calibration standards. The calibration standards are assayed at the same time as the samples and allow the operator to produce a standard curve of Optical Density versus ACP3 concentration. The concentration of ACP3 in the samples is then determined by comparing the O.D. of the samples to the standard curve.
Principle of the Assay: This ACP3 enzyme linked immunosorbent assay applies a technique called a quantitative sandwich immunoassay. The microtiter plate provided in this kit has been pre-coated with a monoclonal antibody specific for ACP3. Standards or samples are then added to the microtiter plate wells and ACP3 if present, will bind to the antibody pre-coated wells. In order to quantitatively determine the amount of ACP3 present in the sample, a standardized preparation of horseradish peroxidase (HRP)-conjugated polyclonal antibody, specific for ACP3 are added to each well to "sandwich" the ACP3 immobilized on the plate. The microtiter plate undergoes incubation, and then the wells are thoroughly washed to remove all unbound components. Next, A and B substrate solution is added to each well. The enzyme (HRP) and substrate are allowed to react over a short incubation period.Only those wells that contain ACP3 and enzyme-conjugated antibody will exhibit a change in colour. The enzyme-substrate reaction is terminated by the addition of a sulphuric acid solution and the colour change is measured spectrophotometrically at a wavelength of 450 nm.
-
Related products with Human ACP3 ELISA Kit