-
Alternative name
Endothelin-1 ELISA KIT; Preproendothelin-1 ELISA KIT; PPET1EDN1 ELISA KIT; ET-1 ELISA KIT; PPET1 ELISA KIT
-
Catalog
E002561
-
species
Human
-
GeneET 1
-
Standard Curve
-
Other Species
Human ET-1 ELISA KitMouse ET-1 ELISA Kit
-
SamplesSerum, Plasma , tissue homogenates,Cell culture supernates,Other biological fluids.
-
Intended UseHuman ET 1 ELISA Kit allows for the in vitro quantitative determination of ET 1 , concentrations in serum, Plasma , tissue homogenates and Cell culture supernates and Other biological fluids.
-
StorageFor 5-7days:Store the whole kit at 4℃
For a Long time :Store the Substrate at 4℃, other reagent should store at -20℃.
-
Product Categories/FamilyEpigenetics and Nuclear Signaling
-
Product Description
specificalIntended Uses: This ET-1 ELISA kit is intended Laboratory for research use only and is not for use in diagnostic or therapeutic procedures.The Stop Solution changes the color from blue to yellow and the intensity of the color is measured at 450 nm using a spectrophotometer. In order to measure the concentration ofET-1 in the sample, thisET-1 ELISA Kit includes a set of calibration standards. The calibration standards are assayed at the same time as the samples and allow the operator to produce a standard curve of Optical Density versusET-1 concentration. The concentration ofET-1 in the samples is then determined by comparing the O.D. of the samples to the standard curve.
Principle of the Assay: This ET-1 enzyme linked immunosorbent assay applies a technique called a quantitative sandwich immunoassay. The microtiter plate provided in this kit has been pre-coated with a monoclonal antibody specific forET-1. Standards or samples are then added to the microtiter plate wells andET-1 if present, will bind to the antibody pre-coated wells. In order to quantitatively determine the amount ofET-1 present in the sample, a standardized preparation of horseradish peroxidase (HRP)-conjugated polyclonal antibody, specific forET-1 are added to each well to "sandwich" theET-1 immobilized on the plate. The microtiter plate undergoes incubation, and then the wells are thoroughly washed to remove all unbound components. Next, A and B substrate solution is added to each well. The enzyme (HRP) and substrate are allowed to react over a short incubation period.Only those wells that containET-1 and enzyme-conjugated antibody will exhibit a change in colour. The enzyme-substrate reaction is terminated by the addition of a sulphuric acid solution and the colour change is measured spectrophotometrically at a wavelength of 450 nm.
-
Related products with Human ET 1 ELISA Kit